Favor si me pueden ayudar, como hago para montar automaticamente mi flash memory en ubuntu 8.04, al insertar la flash memory en el puerto usb, me sale un mensaje que no se ha podido montar, pero desde consola con el comando :
sudo mount -t vfat /dev/sdb1 /media/flash, si la puedo montar, pero quiero que eso se realice automaticamente, por que ni hija de seis años no sabe sobre comandos de consola.

Ademas les comento que cuando pongo dos memorias flash, la primera no la monta automaticamente, y la segunda si, ya probe si son las memorias flash, pero estas estan bien.

Esto me paso desde que instale ubuntu 8.04 desde la memoria flash, por que mi lector de dvd de mi portatil esta dañado,

Les envio las salidas del comando dmesg y del archivo fstab, espero me ayuden.

salida del comando dmesg

::" name="/dev/tty" pid=5319 profile="/usr/sbin/cupsd" namespace="default"
[ 49.020393] Bluetooth: Core ver 2.11
[ 49.020480] NET: Registered protocol family 31
[ 49.020482] Bluetooth: HCI device and connection manager initialized
[ 49.020486] Bluetooth: HCI socket layer initialized
[ 49.044224] Bluetooth: L2CAP ver 2.9
[ 49.044230] Bluetooth: L2CAP socket layer initialized
[ 49.139373] Bluetooth: RFCOMM socket layer initialized
[ 49.139387] Bluetooth: RFCOMM TTY layer initialized
[ 49.139389] Bluetooth: RFCOMM ver 1.8
[ 49.444905] Clocksource tsc unstable (delta = -226237059 ns)
[ 67.955526] CPU0 attaching NULL sched-domain.
[ 67.955537] CPU1 attaching NULL sched-domain.
[ 67.970020] CPU0 attaching sched-domain:
[ 67.970027] domain 0: span 03
[ 67.970032] groups: 01 02
[ 67.970036] CPU1 attaching sched-domain:
[ 67.970039] domain 0: span 03
[ 67.970041] groups: 02 01
[ 133.925144] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 133.992512] usb 1-4: configuration #1 chosen from 1 choice
[ 134.066800] usbcore: registered new interface driver libusual
[ 134.085245] Initializing USB Mass Storage driver...
[ 134.085611] scsi6 : SCSI emulation for USB Mass Storage devices
[ 134.085976] usbcore: registered new interface driver usb-storage
[ 134.085979] USB Mass Storage support registered.
[ 134.086504] usb-storage: device found at 3
[ 134.086507] usb-storage: waiting for device to settle before scanning
[ 136.660033] usb-storage: device scan complete
[ 136.660985] scsi 6:0:0:0: Direct-Access Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 137.268506] sd 6:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 137.270222] sd 6:0:0:0: [sdb] Write Protect is off
[ 137.270226] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 137.270228] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 137.274714] sd 6:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 137.275990] sd 6:0:0:0: [sdb] Write Protect is off
[ 137.275994] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 137.275996] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 137.276000] sdb: sdb1
[ 137.277063] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 137.277101] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 137.607394] UDF-fs: No VRS found
[ 137.890687] ISOFS: Unable to identify CD-ROM format.
[ 360.283485] usb 1-4: USB disconnect, address 3
[ 363.478737] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 363.540527] usb 1-1: conf
iguration #1 chosen from 1 choice
[ 363.540864] scsi7 : SCSI emulation for USB Mass Storage devices
[ 363.541170] usb-storage: device found at 4
[ 363.541172] usb-storage: waiting for device to settle before scanning
[ 365.759919] usb-storage: device scan complete
[ 365.761015] scsi 7:0:0:0: Direct-Access Kingston DataTravelerMini PMAP PQ: 0 ANSI: 0 CCS
[ 366.531866] sd 7:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 366.533150] sd 7:0:0:0: [sdb] Write Protect is off
[ 366.533153] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 366.533156] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 366.537632] sd 7:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 366.538909] sd 7:0:0:0: [sdb] Write Protect is off
[ 366.538912] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 366.538914] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 366.538919] sdb: sdb1
[ 366.539976] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 366.540017] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 366.930053] UDF-fs: No VRS found
[ 367.099803] ISOFS: Unable to identify CD-ROM format.
[ 443.594126] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 471.451636] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 815.345799] sr0: CDROM not ready. Make sure there is a disc in the drive.

archivo fstab
# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/sda1
UUID=d854984a-0f8d-4fa0-99cc-67d113e2f322 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda6
UUID=0d0baa99-8dc5-464b-8ac0-5686a206c9c5 /home ext3 relatime 0 2
# /dev/sda7
UUID=acfa83fb-9537-474d-9574-6237c64dd7f9 none swap sw 0 0
/dev/sdb1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd0 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0

PAG TEMA
52 REGISTRANDO UN SERVICIO
74 BADGE LABEL DESING
151 BUILDING AND LOBBIES
144 CREAR PISOS
171 SCANNER HARDWARE SETUP
191 HABILITAR CAPTURA DE FOTOS