Forums:
Hola a todos.
Talvez la pregunta es tonta pero la verdad es que no encuentro la solucion a este inconveniente.
Tengo un servidor elastix con una tarjeta openvox de 8 puertos.
Existen 5 lineas de las cuales solo una tiene salida a celular. Creé 2 grupos g0 con las 4 líneas para llamadas fijas y el g1 con la 5ta línea para llamadas a celular.
2 troncales creadas una para las fijas y otra para las celulares.
Las llamadas locales funcionan a la perfeccion pero las celulares no caminan por nada.
Ojalá pueda alguien colaborarme con alguna ayuda al respecto.
Mis saludos y feliz año a todos.
Mauricio
extensions.conf
¿Puedes poner tu archivo extensions.conf?
Gerardo Jacinto Astudillo
El archivo:
El archivo:
#include extensions_override_freepbx.conf
; *
;************************** -WARNING- ****************************************
; include extension contexts generated from AMP
#include extensions_additional.conf
; Customizations to this dialplan should be made in extensions_custom.conf
; See extensions_custom.conf.sample for an example.
; If you need to use [macro-dialout-trunk-predial-hook], [ext-did-custom], or
; [from-internal-custom] for example, place these in this file or they will get overwritten.
;
#include extensions_custom.conf
[from-digital]
include => from-pstn
[from-analog]
include => from-dahdi
[from-trunk] ; just an alias since VoIP shouldn't be called PSTN
include => from-pstn
[from-pstn]
include => from-pstn-custom ; create this context in extensions_custom.conf to include customizations
include => ext-did
include => ext-did-post-custom
include => from-did-direct ; MODIFICATION (PL) for findmefollow if enabled, should be before ext-local
include => ext-did-catchall ; THIS MUST COME AFTER ext-did
;-------------------------------------------------------------------------------
; from-pstn-e164-us:
;
; The context is designed for providers who send calls in e164 format and is
; biased towards NPA calls, callerid and dialing rules. It will do the following:
;
; DIDs in an NPA e164 format of +1NXXNXXXXXX will be converted to 10 digit DIDs
;
; DIDs in any other format will be delivered as they are, including e164 non NPA
; DIDs which means they will need the full format including the + in the inbound
; route.
;
; CallerID(number) presented in e164 NPA format will be trimmed to a 10 digit CID
;
; CallerID(number) presented in e164 non-NPA (country code other than 1) will be
; reformated from: + to 011
;
[from-pstn-e164-us]
exten => _+1NXXNXXXXXX/_+1NXXNXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2})
exten => _+1NXXNXXXXXX/_NXXNXXXXXX,2,Goto(from-pstn,${EXTEN:2},1)
exten => _+1NXXNXXXXXX/_+X.,1,Set(CALLERID(number)=011${CALLERID(number):1})
exten => _+1NXXNXXXXXX/_011X.,n,Goto(from-pstn,${EXTEN:2},1)
exten => _+1NXXNXXXXXX,1,Goto(from-pstn,${EXTEN:2},1)
exten => _[0-9+]./_+1NXXNXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2})
exten => _[0-9+]./_NXXNXXXXXX,n,Goto(from-pstn,${EXTEN},1)
exten => _[0-9+]./_+X.,1,Set(CALLERID(number)=011${CALLERID(number):1})
exten => _[0-9+]./_011X.,n,Goto(from-pstn,${EXTEN},1)
exten => _[0-9+].,1,Goto(from-pstn,${EXTEN},1)
exten => s/_+1NXXNXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2})
exten => s/_NXXNXXXXXX,n,Goto(from-pstn,${EXTEN},1)
exten => s/_+X.,1,Set(CALLERID(number)=011${CALLERID(number):1})
exten => s/_011X.,n,Goto(from-pstn,${EXTEN},1)
exten => s,1,Goto(from-pstn,${EXTEN},1)
;-------------------------------------------------------------------------------
;-------------------------------------------------------------------------------
; from-pstn-to-did
;
; The context is designed for providers who send the DID in the TO: SIP header
; only. The format of this header is:
;
; To:
;
; So the DID must be extracted between the sip: and the @, which this does
;
[from-pstn-toheader]
exten => _.,1,Goto(from-pstn,${CUT(CUT(SIP_HEADER(To),@,1),:,2)},1)
;-------------------------------------------------------------------------------
; MODIFICATION (PL)
;
; Required to assure that direct dids go to personal ring group before local extension.
; This could be auto-generated however I it is preferred to be put here and hard coded
; so that it can be modified if ext-local should take precedence in certain situations.
; will have to decide what to do later.
;
[from-did-direct]
include => ext-findmefollow
include => ext-local
; ############################################################################
; Macros [macro]
; ############################################################################
; Rings one or more extensions. Handles things like call forwarding and DND
; We don't call dial directly for anything internal anymore.
; ARGS: $TIMER, $OPTIONS, $EXT1, $EXT2, $EXT3, ...
; Use a Macro call such as the following:
; Macro(dial,$DIAL_TIMER,$DIAL_OPTIONS,$EXT1,$EXT2,$EXT3,...)
[macro-dial]
exten => s,1,GotoIf($["${MOHCLASS}" = ""]?dial)
exten => s,n,SetMusicOnHold(${MOHCLASS})
exten => s,n(dial),AGI(dialparties.agi)
exten => s,n,NoOp(Returned from dialparties with no extensions to call and DIALSTATUS: ${DIALSTATUS})
exten => s,n+2(normdial),Dial(${ds}) ; dialparties will set the priority to 10 if $ds is not null
exten => s,n,Set(DIALSTATUS=${IF($["${DIALSTATUS_CW}"!="" ]?${DIALSTATUS_CW}:${DIALSTATUS})})
exten => s,n,GosubIf($["${SCREEN}" != "" | "${DIALSTATUS}" = "ANSWER"]?${DIALSTATUS},1)
exten => s,20(huntdial),NoOp(Returned from dialparties with hunt groups to dial )
exten => s,n,Set(HuntLoop=0)
exten => s,n(a22),GotoIf($[${HuntMembers} >= 1]?a30) ; if this is from rg-group, don't strip prefix
exten => s,n,NoOp(Returning there are no members left in the hunt group to ring)
; dialparties.agi has setup the dialstring for each hunt member in a variable labeled HuntMember0, HuntMember1 etc for each iteration
; and The total number in HuntMembers. So for each iteration, we will update the CALLTRACE Data.
;
exten => s,n+2(a30),Set(HuntMember=HuntMember${HuntLoop})
exten => s,n,GotoIf($[$["${CALLTRACE_HUNT}" != "" ] & $[$["${RingGroupMethod}" = "hunt" ] | $["${RingGroupMethod}" = "firstavailable"] | $["${RingGroupMethod}" = "firstnotonphone"]]]?a32:a35)
exten => s,n(a32),Set(CT_EXTEN=${CUT(FILTERED_DIAL,,$[${HuntLoop} + 1])})
exten => s,n,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,n,Goto(s,a42)
;Set Call Trace for each hunt member we are going to call "Memory groups have multiple members to set CALL TRACE For" hence the loop
;
exten => s,n(a35),GotoIf($[$["${CALLTRACE_HUNT}" != "" ] & $["${RingGroupMethod}" = "memoryhunt" ]]?a36:a50)
exten => s,n(a36),Set(CTLoop=0)
exten => s,n(a37),GotoIf($[${CTLoop} > ${HuntLoop}]?a42) ; if this is from rg-group, don't strip prefix
exten => s,n,Set(CT_EXTEN=${CUT(FILTERED_DIAL,,$[${CTLoop} + 1])})
exten => s,n,Set(DB(CALLTRACE/${CT_EXTEN})=${CALLTRACE_HUNT})
exten => s,n,Set(CTLoop=$[1 + ${CTLoop}])
exten => s,n,Goto(s,a37)
exten => s,n(a42),Dial(${${HuntMember}}${ds})
exten => s,n,GotoIf($["${DIALSTATUS}" = "ANSWER"]?ANSWER,1)
exten => s,n,Set(HuntLoop=$[1 + ${HuntLoop}])
exten => s,n,GotoIf($[$[$["foo${RingGroupMethod}" != "foofirstavailable"] & $["foo${RingGroupMethod}" != "foofirstnotonphone"]] | $["foo${DialStatus}" = "fooBUSY"]]?a46)
exten => s,n,Set(HuntMembers=0)
exten => s,n(a46),Set(HuntMembers=$[${HuntMembers} - 1])
exten => s,n,Goto(s,a22)
exten => s,n(a50),DBdel(CALLTRACE/${CT_EXTEN})
exten => s,n,Goto(s,a42)
; For call screening
exten => NOANSWER,1,Macro(vm,${SCREEN_EXTEN},BUSY,${IVR_RETVM})
exten => NOANSWER,n,GotoIf($["${IVR_RETVM}" != "RETURN" | "${IVR_CONTEXT}" = ""]?bye)
exten => NOANSWER,n,Return
exten => NOANSWER,n(bye),Macro(hangupcall)
exten => TORTURE,1,Goto(app-blackhole,musiconhold,1)
exten => TORTURE,n,Macro(hangupcall)
exten => DONTCALL,1,Answer
exten => DONTCALL,n,Wait(1)
exten => DONTCALL,n,Zapateller()
exten => DONTCALL,n,Playback(ss-noservice)
exten => DONTCALL,n,Macro(hangupcall)
exten => ANSWER,1,Noop(Call successfully answered - Hanging up now)
exten => ANSWER,n,Macro(hangupcall,)
; make sure hungup calls go here so that proper cleanup occurs from call confirmed calls and the like
;
exten => h,1,Macro(hangupcall)
; get the voicemail context for the user in ARG1
[macro-get-vmcontext]
exten => s,1,Set(VMCONTEXT=${DB(AMPUSER/${ARG1}/voicemail)})
exten => s,2,GotoIf($["foo${VMCONTEXT}" = "foo"]?200:300)
exten => s,200,Set(VMCONTEXT=default)
exten => s,300,NoOp()
; For some reason, if I don't run setCIDname, CALLERID(name) will be blank in my AGI
; ARGS: none
[macro-fixcid]
exten => s,1,Set(CALLERID(name)=${CALLERID(name)})
; Ring groups of phones
; ARGS: comma separated extension list
; 1 - Ring Group Strategy
; 2 - ringtimer
; 3 - prefix
; 4 - extension list
[macro-rg-group]
exten => s,1,Macro(user-callerid,SKIPTTL) ; already called from ringgroup
exten => s,2,GotoIf($["${CALLERID(name):0:${LEN(${RGPREFIX})}}" != "${RGPREFIX}"]?4:3) ; check for old prefix
exten => s,3,Set(CALLERID(name)=${CALLERID(name):${LEN(${RGPREFIX})}}) ; strip off old prefix
exten => s,4,Set(RGPREFIX=${ARG3}) ; set new prefix
exten => s,5,Set(CALLERID(name)=${RGPREFIX}${CALLERID(name)}) ; add prefix to callerid name
exten => s,6,Set(RecordMethod=Group) ; set new prefix
exten => s,7,Macro(record-enable,${MACRO_EXTEN},${RecordMethod})
exten => s,8,Set(RingGroupMethod=${ARG1}) ;
exten => s,9,Macro(dial,${ARG2},${DIAL_OPTIONS},${ARG4})
exten => s,10,Set(RingGroupMethod='') ;
;
; Outgoing channel(s) are busy ... inform the client
; but use noanswer features like ringgroups don't break by being answered
; just to play the message.
;
[macro-outisbusy]
exten => s,1,Progress
exten => s,n,Playback(all-circuits-busy-now,noanswer)
exten => s,n,Playback(pls-try-call-later,noanswer)
exten => s,n,Macro(hangupcall)
; dialout and strip the prefix
[macro-dialout]
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,2,GotoIf($["${ECID${CALLERID(number)}}" = ""]?5) ;check for CID override for exten
exten => s,3,Set(CALLERID(all)=${ECID${CALLERID(number)}})
exten => s,4,Goto(7)
exten => s,5,GotoIf($["${OUTCID_${ARG1}}" = ""]?7) ;check for CID override for trunk
exten => s,6,Set(CALLERID(all)=${OUTCID_${ARG1}})
exten => s,7,Set(length=${LEN(${DIAL_OUT_${ARG1}})})
exten => s,8,Dial(${OUT_${ARG1}}/${ARG2:${length}})
exten => s,9,Playtones(congestion)
exten => s,10,Congestion(5)
exten => s,109,Macro(outisbusy)
; dialout using default OUT trunk - no prefix
[macro-dialout-default]
exten => s,1,Macro(user-callerid,SKIPTTL)
exten => s,2,Macro(record-enable,${CALLERID(number)},OUT)
exten => s,3,Macro(outbound-callerid,${ARG1})
exten => s,4,Dial(${OUT}/${ARG1})
exten => s,5,Playtones(congestion)
exten => s,6,Congestion(5)
exten => s,105,Macro(outisbusy)
[macro-dialout-trunk-predial-hook]
; this macro intentionally left blank so it may be safely overwritten for any custom
; requirements that an installation may have.
;
; MACRO RETURN CODE: ${PREDIAL_HOOK_RET}
; if set to "BYPASS" then this trunk will be skipped
;
exten => s,1,MacroExit()
[macro-user-logon]
; check device type
;
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,n,Answer()
exten => s,n,Wait(1)
exten => s,n,GotoIf($["${DEVICETYPE}" = "fixed"]?s-FIXED,1)
; get user's extension
;
exten => s,n,Set(AMPUSER=${ARG1})
exten => s,n,GotoIf($["${AMPUSER}" != ""]?gotpass)
exten => s,n(playagain),Read(AMPUSER,please-enter-your-extension-then-press-pound,,,4)
; get user's password and authenticate
;
exten => s,n,GotoIf($["${AMPUSER}" = ""]?s-MAXATTEMPTS,1)
exten => s,n(gotpass),GotoIf($["${DB_EXISTS(AMPUSER/${AMPUSER}/password)}" = "0"]?s-NOUSER,1)
exten => s,n,Set(AMPUSERPASS=${DB_RESULT})
exten => s,n,GotoIf($[${LEN(${AMPUSERPASS})} = 0]?s-NOPASSWORD,1)
; do not continue if the user has already logged onto this device
;
exten => s,n,Set(DEVICEUSER=${DB(DEVICE/${CALLERID(number)}/user)})
exten => s,n,GotoIf($["${DEVICEUSER}" = "${AMPUSER}"]?s-ALREADYLOGGEDON,1)
exten => s,n,Authenticate(${AMPUSERPASS})
exten => s,n,AGI(user_login_out.agi,login,${CALLERID(number)},${AMPUSER})
exten => s,n,Playback(vm-goodbye)
exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged into)
exten => s-FIXED,n,Playback(ha/phone)
exten => s-FIXED,n,SayDigits(${CALLERID(number)})
exten => s-FIXED,n,Playback(is-curntly-unavail&vm-goodbye)
exten => s-FIXED,n,Hangup ;TODO should play msg indicated device cannot be logged into
exten => s-ALREADYLOGGEDON,1,NoOp(This device has already been logged into by this user)
exten => s-ALREADYLOGGEDON,n,Playback(vm-goodbye)
exten => s-ALREADYLOGGEDON,n,Hangup ;TODO should play msg indicated device is already logged into
exten => s-NOPASSWORD,1,NoOp(This extension does not exist or no password is set)
exten => s-NOPASSWORD,n,Playback(pbx-invalid)
exten => s-NOPASSWORD,n,Goto(s,playagain)
exten => s-MAXATTEMPTS,1,NoOp(Too many login attempts)
exten => s-MAXATTEMPTS,n,Playback(vm-goodbye)
exten => s-MAXATTEMPTS,n,Hangup
exten => s-NOUSER,1,NoOp(Invalid extension ${AMPUSER} entered)
exten => s-NOUSER,n,Playback(pbx-invalid)
exten => s-NOUSER,n,Goto(s,playagain)
[macro-user-logoff]
; check device type
;
exten => s,1,Set(DEVICETYPE=${DB(DEVICE/${CALLERID(number)}/type)})
exten => s,n,GotoIf($["${DEVICETYPE}" = "fixed"]?s-FIXED,1)
exten => s,n,AGI(user_login_out.agi,logout,${CALLERID(number)})
exten => s,n(done),Playback(vm-goodbye)
exten => s-FIXED,1,NoOp(Device is FIXED and cannot be logged out of)
exten => s-FIXED,n,Playback(an-error-has-occured&vm-goodbye)
exten => s-FIXED,n,Hangup ;TODO should play msg indicated device cannot be logged into
; Privacy Manager Macro makes sure that any calls that don't pass the privacy manager are presented
; with congestion since there have been observed cases of the call continuing if not stopped with a
; congestion, and this provides a slightly more friendly 'sorry' message in case the user is
; legitimately trying to be cooperative.
;
; Note: the following options are configurable in privacy.conf:
;
; maxretries = 3 ; default value, number of retries before failing
; minlength = 10 ; default value, number of digits to be accepted as valid CID
;
[macro-privacy-mgr]
exten => s,1,Set(KEEPCID=${CALLERID(num)})
exten => s,n,GotoIf($["foo${CALLERID(num):0:1}"="foo+"]?CIDTEST2:CIDTEST1)
exten => s,n(CIDTEST1),Set(TESTCID=${MATH(1+${CALLERID(num)})})
exten => s,n,Goto(TESTRESULT)
exten => s,n(CIDTEST2),Set(TESTCID=${MATH(1+${CALLERID(num):1})})
exten => s,n(TESTRESULT),GotoIf($["foo${TESTCID}"="foo"]?CLEARCID:PRIVMGR)
exten => s,n(CLEARCID),Set(CALLERID(num)=)
exten => s,n(PRIVMGR),PrivacyManager(${ARG1},${ARG2})
exten => s,n,GotoIf($["${PRIVACYMGRSTATUS}"="FAILED"]?fail)
exten => s,n,GosubIf($["${CALLED_BLACKLIST}" = "1"]?app-blacklist-check,s,1)
exten => s,n,SetCallerPres(allowed_passed_screen); stop gap until app_privacy.c clears unavailable bit
exten => s,PRIVMGR+101(fail),Noop(STATUS: ${PRIVACYMGRSTATUS} CID: ${CALLERID(num)} ${CALLERID(name)} CALLPRES: ${CALLLINGPRES})
exten => s,n,Playback(sorry-youre-having-problems)
exten => s,n,Playback(goodbye)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
exten => h,1,Hangup
; Text-To-Speech related macros
; These all follow common actions. First try to playback a file "tts/custom-md5"
; where "md5" is the md5() of whatever is going to be played. If that doesn't exist,
; try to playback using macro-tts-sayXXXXX (where XXXXX is text/digits/etc, same as
; the macro below). If that macro exits with MACRO_OFFSET=100, then it's done,
; otherwise, fallback to the default asterisk method.
;
; say text is purely for text-to-speech, there is no fallback
[macro-saytext]
exten => s,1,Noop(Trying custom SayText playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-saytext. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saytext,${ARG1},${ARG2},${ARG3})
exten => s,n,Noop(No text-to-speech handler for SayText, cannot say "${ARG1}")
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled saytext)
; say name is for saying names typically, but fallsback to using SayAlpha
; (saying the word letter-by-letter)
[macro-sayname]
exten => s,1,Noop(Trying custom SayName playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-sayalpha. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-sayalpha,${ARG1},${ARG2},${ARG3})
exten => s,n,SayAlpha(${ARG1})
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled sayname)
; Say number is for saying numbers (eg "one thousand forty six")
[macro-saynumber]
exten => s,1,Noop(Trying custom SayNumber playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-saynumber. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saynumber,${ARG1},${ARG2},${ARG3})
exten => s,n,SayNumber(${ARG1})
exten => s,n,Goto(done)
exten => s,tts+101,Noop(tts handled saynumber)
; Say digits is for saying digits one-by-one (eg, "one zero four six")
[macro-saydigits]
exten => s,1,Noop(Trying custom SayDigits playback for "${ARG1}")
exten => s,n,Playback(tts/custom-${MD5(${ARG1})})
exten => s,n,GotoIf($["${PLAYBACKSTATUS}"="SUCCESS"]?done)
; call tts-saydigits. This should set MACRO_OFFSET=101 if it was successful
exten => s,n(tts),Macro(tts-saydigits,${ARG1},${ARG2},${ARG3})
exten => s,n,SayDigits(${ARG1})
exten => s,n,Goto(done)
;
; ############################################################################
; Inbound Contexts [from]
; ############################################################################
[from-sip-external]
; Yes. This is _really_ meant to be _. - I know asterisk whines about it, but
; I do know what I'm doing. This is correct.
exten => _.,1,NoOp(Received incoming SIP connection from unknown peer to ${EXTEN})
exten => _.,n,Set(DID=${IF($["${EXTEN:1:2}"=""]?s:${EXTEN})})
exten => _.,n,Goto(s,1)
exten => s,1,GotoIf($["${ALLOW_SIP_ANON}"="yes"]?checklang:noanonymous)
exten => s,n(checklang),GotoIf($["${SIPLANG}"!=""]?setlanguage:from-trunk,${DID},1)
exten => s,n(setlanguage),Set(CHANNEL(language)=${SIPLANG})
exten => s,n,Goto(from-trunk,${DID},1)
exten => s,n(noanonymous),Set(TIMEOUT(absolute)=15)
exten => s,n,Answer
exten => s,n,Wait(2)
exten => s,n,Playback(ss-noservice)
exten => s,n,Playtones(congestion)
exten => s,n,Congestion(5)
exten => h,1,Hangup
exten => i,1,Hangup
exten => t,1,Hangup
[from-internal-xfer]
; applications are now mostly all found in from-internal-additional in _custom.conf
include => from-internal-custom
include => parkedcalls
; MODIFIED (PL)
;
; Currently the include for findmefollow is being auto-generated before ext-local which is the desired behavior.
; However, I haven't been able to do anything that I know of to force this. We need to determine if it should
; be hardcoded into here to make sure it doesn't change with some configuration. For now I will leave it out
; until we can discuss this.
;
include => ext-local-confirm
include => findmefollow-ringallv2
include => from-internal-additional
; This causes grief with '#' transfers, commenting out for the moment.
; include => bad-number
exten => s,1,Macro(hangupcall)
exten => h,1,Macro(hangupcall)
[from-internal]
include => from-internal-xfer
include => bad-number
;------------------------------------------------------------------------
; [macro-setmusic]
;------------------------------------------------------------------------
; CONTEXT: macro-setmusic
; PURPOSE: to turn off moh on routes where it is not desired
;
;------------------------------------------------------------------------
[macro-setmusic]
exten => s,1,NoOp(Setting Outbound Route MoH To: ${ARG1})
exten => s,2,Set(CHANNEL(musicclass)=${ARG1}) ; this won't work in 1.2 anymore, could fix in auto-generate if we wanted...
;------------------------------------------------------------------------
; ##########################################
; ## Ring Groups with Confirmation macros ##
; ##########################################
; Used by followme and ringgroups
;------------------------------------------------------------------------
; [macro-dial-confirm]
;------------------------------------------------------------------------
; This has now been incorporated into dialparties. It still only works with ringall
; and ringall-prim strategies. Have not investigated why it doesn't work with
; hunt and memory hunt.
;
;------------------------------------------------------------------------
[macro-dial-confirm]
; This was written to make it easy to use macro-dial-confirm instead of macro-dial in generated dialplans.
; This takes the same parameters, with an additional parameter of the ring group Number
; ARG1 is the timeout
; ARG2 is the DIAL_OPTIONS
; ARG3 is a list of xtns to call - 203-222-240-123123123#-211
; ARG4 is the ring group number
; This sets a unique value to indicate that the channel is ringing. This is used for warning slow
; users that the call has already been picked up.
;
exten => s,1,Set(DB(RG/${ARG4}/${CHANNEL})=RINGING)
; We need to keep that channel variable, because it'll change when we do this dial, so set it to
; fallthrough to every sibling.
;
exten => s,n,Set(__UNIQCHAN=${CHANNEL})
; The calling ringgroup should have set RingGroupMethod appropriately. We need to set two
; additional parameters:
;
; USE_CONFIRMATION, RINGGROUP_INDEX
;
; These are passed to inform dialparties to place external calls through the [grps] context
;
exten => s,n,Set(USE_CONFIRMATION=TRUE)
exten => s,n,Set(RINGGROUP_INDEX=${ARG4})
exten => s,n,Set(ARG4=) ; otherwise it gets passed to dialparties.agi which processes it (prob bug)
exten => s,n,Macro(dial,${ARG1},${ARG2},${ARG3})
; delete the variable, if we are here, we are done trying to dial and it may have been left around
;
exten => s,n,Noop(DELETE KEY: RG/${RINGGROUP_INDEX}/${CHANNEL}: ${DB_DELETE(RG/${RINGGROUP_INDEX}/${CHANNEL})})
exten => s,n,Set(USE_CONFIRMATION=)
exten => s,n,Set(RINGGROUP_INDEX=)
;------------------------------------------------------------------------
;------------------------------------------------------------------------
; [ext-local-confirm]
;------------------------------------------------------------------------
; If call confirm is being used in a ringgroup, then calls that do not require confirmation are sent
; to this extension instead of straight to the device.
;
; The sole purpose of sending them here is to make sure we run Macro(auto-confirm) if this
; extension answers the line. This takes care of clearing the database key that is used to inform
; other potential late comers that the extension has been answered by someone else.
;
; ALERT_INFO is deprecated in Asterisk 1.4 but still used throughout the FreePBX dialplan and
; usually set by dialparties.agi. This allows inheritance. Since no dialparties.agi here, set the
; header if it is set.
;
;------------------------------------------------------------------------
[ext-local-confirm]
exten => _LC-.,1,Noop(IN ext-local-confirm with - RT: ${RT}, RG_IDX: ${RG_IDX})
exten => _LC-.,n,GotoIf($["x${ALERT_INFO}"="x"]?godial)
exten => _LC-.,n,SIPAddHeader(Alert-Info: ${ALERT_INFO})
exten => _LC-.,n(godial),dial(${DB(DEVICE/${EXTEN:3}/dial)},${RT},M(auto-confirm^${RG_IDX})${DIAL_OPTIONS})
;------------------------------------------------------------------------
; [findmefollow-ringallv2]
;------------------------------------------------------------------------
; This context, to be included in from-internal, implements the PreRing part of findmefollow
; as well as the GroupRing part. It also communicates between the two so that if DND is set
; on the primary extension, and mastermode is enabled, then the other extensions will not ring
;
;------------------------------------------------------------------------
[findmefollow-ringallv2]
exten => _FMPR-.,1,Noop(In FMPR ${FMGRP} with ${EXTEN:5})
exten => _FMPR-.,n,Set(RingGroupMethod=)
exten => _FMPR-.,n,Set(USE_CONFIRMATION=)
exten => _FMPR-.,n,Set(RINGGROUP_INDEX=)
exten => _FMPR-.,n,Macro(simple-dial,${EXTEN:5},${FMREALPRERING})
exten => _FMPR-.,n,GotoIf($["${DIALSTATUS}" != "BUSY"]?nodnd)
exten => _FMPR-.,n,Set(DB(FM/DND/${FMGRP}/${FMUNIQUE})=DND)
exten => _FMPR-.,n(nodnd),Noop(Ending FMPR ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMPR-.,n,Hangup()
exten => _FMGL-.,1,Noop(In FMGL ${FMGRP} with ${EXTEN:5})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(1)
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,Wait(${FMPRERING})
exten => _FMGL-.,n,GotoIf($["${DB(FM/DND/${FMGRP}/${FMUNIQUE})}" = "DND"]?dodnd)
exten => _FMGL-.,n,DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n(dodial),Macro(dial,${FMGRPTIME},${DIAL_OPTIONS},${EXTEN:5})
exten => _FMGL-.,n,Noop(Ending FMGL ${FMGRP} with ${EXTEN:5} and dialstatus ${DIALSTATUS})
exten => _FMGL-.,n,Hangup()
exten => _FMGL-.,n+10(dodnd),DBDel(FM/DND/${FMGRP}/${FMUNIQUE})
exten => _FMGL-.,n,GotoIf($["${FMPRIME}" = "FALSE"]?dodial)
exten => _FMGL-.,n,Noop(Got DND in FMGL ${FMGRP} with ${EXTEN:5} in ${RingGroupMethod} mode, aborting)
exten => _FMGL-.,n,Hangup()
;------------------------------------------------------------------------
; [block-cf]
;------------------------------------------------------------------------
; This context is set as a target with FORWARD_CONTEXT when Call Forwarding is set to be
; ignored in a ringgroup or other features that may take advantage of this. Server side
; CF is done in dialparties.agi but if a client device forwards a call, it will be caught
; and blocked here.
;------------------------------------------------------------------------
[block-cf]
exten => _X.,1,Noop(Blocking callforward to ${EXTEN} because CF is blocked)
exten => _X.,n,Hangup()
;------------------------------------------------------------------------
;this is where parked calls go if they time-out. Should probably re-ring
[default]
include => ext-local
exten => s,1,Playback(vm-goodbye)
exten => s,2,Macro(hangupcall)
Ojala encuentres algo.
Gracias de antemano.
Mauricio
En extensions_custom.conf
Hola Disculpa la demora, mira en extensions_custom.conf debe estar el contexto que creaste para la linea 5 (que es donde tienes la salida a celulares, segun lo que expones)
para celulares de mèxico la configuracion debe ser mas o menos asì:
[celulares]
exten => _904[45]XXXXXXXXXX,1,Dial(DAHDI/g1/${EXTEN:1})
exten => _904[45]XXXXXXXXXX,2,Hangup
¿que version de elastix tienes?
saludos
Gerardo Jacinto Astudillo
Hola,
Hola,
Gracias por responder, utilizo Elastix 2.2
Saludos
Mauricio
Se resolvio?
Hola Mauricio, ¿se resolvio tu problema?
Gerardo Jacinto Astudillo